This machine is suitable for the filling and seaming of carbonated soft drinks, beer, etc. The production capacity is50-200 cans per minute.
The whole machine can be divided into two positions, filling and seaming, filling is used for pressure filling, liquid level is controlled by liquid level filling principle, and the material temperature is suitable for low-temperature filling. The seal adopts a double - wheel progressive seal.
After the empty cans pass the conveyor and separated by enter-in cans screw,by the enter-in dialing plate driving enter into the cans-support seat,then the cans-support rise and move to the switch valve position, and make the first exhaust,and the cans-support seat continue to rise to the filling valve seal.And close the gas-guide pipe immediately,open the exhaust close,make the second exhaust then close the exhaust switch immediately.The filling barrel continue rotating a certain angle to the second switch valve position, fully open the filling valve,the material flow into the cans until full.